Ezy Glide Stick III Boat Steering Model 870
Ezy-Glide Stick-III Steering - Model 870
The Ezy-Stick II is a mechanical steering system designed so the operator may be positioned in the front of the boat for better visibility. Designed for boats with limited space. The push-pull design allows the system to be mounted next to the operator located at the front of the boat giving the operator better visibility and convenience. This also eliminates the need for a center console saving valuable space. The Ezy-Stik II model 870 has a quicker ratio which provies a faster response and a shorter travel distance from lock to lock. Due to the fact that 4-stroke engines tranfer more negative torque feedback to the operator, if the engine is a 4-stroke over 40hp, the Ezy-Stik model 840 should be considered over the model 870.
MEASURE FROM THE CENTER OF THE HELM POSITION TO THE CENTER OF THE ENGINE AND ADD 8” TO THIS MEASUREMENT. ROUND UP YOUR SYSTEM LENGTH MEASUREMENT TO THE NEAREST ½ FT LENGTH (I.E. A 12’2” MEASUREMENT WOULD ORDER A 12½’ CABLE).
Model 870 Specs:
Total Lever Movment:
44.8 Inches / 161 Degrees
This system is rated for
Outboard engines not to exceed 70 H.P.
Jet drives not to exceed 90 H.P.
Standard cable lengths range from 6 to 15 feet. Cables longer than 15' can be custom ordered for $5 per additional foot. Call us at 1-888-923-6558 to place a custom order.
Photos may be stock file photos from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately. Please review the part number and description and contact us at 888-923-6558 with any questions before ordering.
Find Similar Products by Category
Customers also viewed